headerphoto
Testing Equipments > Flexure Strength Testing Machine for Concrete Slabs

List of Concrete Testing Equipments
Flexure Strength Testing Machine for Concrete Slabs
Flexure Strength Testing Machine for Concrete Slabs
Flexure Strength
As Concrete air entrainment of air in limited percentage improves durability of concrete and very low percentages deteriorate it, measurement of air entrapped

IS: 516, IS: 9399, BS: 1881, and ASTM C78.
The Flexure Strength Testing Machines are designed to provide maximum rigidity throughout their working range. The downward movement of Hydraulic ram applies the load. The jack can be raised or lowered for testing different size beams. The load is indicated on a calibrated Bourdon tube type load gauge of range: 0-100KN X 0.5KN (0-10,000 kgf X 50 kgf). The load gauge is calibrated against NPL/NCCBM certified proving ring.

ML – 135 Flexure Strength Testing Machine (concrete slabs)
IS: 4969

This Flexural Strength Testing Machine is designed to suit the requirements to test precast Cement Concrete slabs for Canal Lining. The machine consists of a Bench Mounting type loading unit having a capacity of 25kN (2,500 kgf) with a self retracting type jack and a hand operated hydraulic pump. A 25 kN x 0.25 kN capacity pressure gauge, with maximum load indicating pointer, is attached to the pump. The machine has a set of platens, the top platen has a self aligning roller fixed at the centre and the lower one has two rollers of 25 mm dia, equally spaced at a distance of 15 cm. These rollers are hard chrome Plated to increase the abrasion resistance and hardness. Suitable for operation with 230 volts, 50 Hz, and single phase, AC Supply

Available Models are:
ML – 135 Loading capacity 25 KN Manually operated
ML – 136 Loading capacity 100 KN Manually operated
ML – 137 Loading capacities 100 KN Motorised