|
Product Description:
The Elcometer 3120 range of durometers is widely used to test the hardness of soft materials. A round point indents the material under a fixed force spring and the hardness is displayed on the dial in Shore Hardness Units.
The instrument can be either hand held or fitted to an optional stand for increased repeatability.
The Elcometer 3120 range of Shore Durometers encompasses a number of hardness values. Please refer to the table below.
Material Relative Hardness Range
Technical Specification:
Part Number
|
Description |
| Without certificate |
With Certificate
|
| K0003120M001 |
K0003120M015 |
Elcometer 3120 Shore Durometer A |
| K0003120M008 |
-
|
Elcometer 3120 Shore Durometer A with Max indicator
|
|
K0003120M025 |
Elcometer 3120 Shore Durometer A with Max indicator and 12.5N weight |
| K0003120M003 |
K0003120M016 |
Elcometer 3120 Shore Durometer B |
| K0003120M204 |
-
|
Elcometer 3120 Shore Durometer B with Max indicator
|
| K0003120M004 |
K0003120M017 |
Elcometer 3120 Shore Durometer C
|
| K0003120M205 |
-
|
Elcometer 3120 Shore Durometer C with Max indicator
|
| K0003120M005 |
K0003120M018 |
Elcometer 3120 Shore Durometer D
|
| K0003120M009 |
-
|
Elcometer 3120 Shore Durometer D with Max indicator
|
| K0003120M010 |
-
|
Elcometer 3120 Shore Durometer DO |
| K0003120M208 |
-
|
Elcometer 3120 Shore Durometer DO with Max indicator
|
| K0003120M006 |
K0003120M019 |
Elcometer 3120 Shore Durometer O
|
| K0003120M207 |
-
|
Elcometer 3120 Shore Durometer O with Max indicator
|
| K0003120M221 |
K0003120M222 |
Elcometer 3120 Shore Durometer OO with Max indicator and 400g (14.11oz) mass
|
| K0003120M024 |
-
|
Elcometer 3120 Shore Durometer OOO with Max indicator and 400g (14.11oz) mass
|
| Dimensions |
50 x 50 x 110mm (1.9 x 1.9 x 4.3”) |
| Weight |
300g (10.58oz) |
| Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. |
| Packing List |
Elcometer Shore Durometer and operating instructions. A Check Piece is
supplied with Elcometer Shore Durometers A and D |
Can be used in accordance with:
ASTM D 2240, BS 7442-3.2, DIN 53505, FIAT 50411, ISO 868, ISO 7267-2, NF T51-123, NF T 51-174
Standards in grey have been superseded but are still recognised in some industries.
Accessories:
| KT003120N002 |
Test Stand BS 61 II with 10N/12.5N Load for Shore A, B & O |
| KT003120N203 |
Test Stand BS 61 II with 400g Load for Shore OO and OOO |
| KT003120N005 |
Test Stand BS 61 II with 50N Load & Control Ring for Shore D, C & DO |
 Download Full Catalog
|
