|
Product Description:
Designed to evaluate resistance to scratching, a tool is fitted with an hemispherical end of 1mm (0.04”) diameter (standard), lowered gradually on to the surface of the sample and moved 60mm (2.36”). The sample width must be approximately 75mm (2.95 ).
Depending on the load applied, varying degrees of penetration of the tool into the coating are observed, from a superficial trace to total destruction. As the sample is pulled by hand, the tool lowers on to the sample, moves along it and gently rises up.
Technical Specification:
Part Number
|
Description |
| K0003000M001 |
Elcometer 3000 Manual Clemen Unit |
| Dimensions |
Manual: 410 x 200 x 155mm (16.1 x 7.9 x 6.1") |
| Weight |
Manual: 6 kg (13.2 lb) |
| Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. |
| Packing List |
Elcometer 3000 Manual Clemen Unit, 1kg (35.27oz) weight, 1mm (0.04") ball tool and operating instructions |
Can be used in accordance with:
AS/NZS 1580.403.1, BS 3900-E2, DIN 53799, ECCA T12, EN 13523-12, ISO 1518-1:2011
Standards in grey have been superseded but are still recognised in some industries.
Accessories:
| KT003000P021 |
1 mm (0,04") Ball Tool in Tungsten Carbide |
| KT003000N001 |
2 mm (0,08") Cutting Tool in Tungsten Carbide |
| KT003000N013 |
VW Cutting Tool |
| KT003000N002 |
1 cm2 (0,15 inch2) Rubber Tool (to be used as a guide to the dryness of a sample) |
| KT007210M001 |
Illuminated Microscope (x30) |
| KT001546N002 |
Cross Cut Magnifying Glass |
 Download Full Catalog
|
