 Download Full Catalog
Product Description:
Flash Point is defined as “the lowest temperature of a liquid at which its vapours will form a combustible mixture with air”. It is a convenient and reliable classification of the “flammability” of many substances.
- Open Cup tests simulate an un-contained condition, for example a spillage.
- Closed Cup tests simulate an enclosed environment, for example storage in a tank or sealed container and are usually specified due to improved precision.
Most industries need to test the Flash Point of raw materials, products or waste to ensure:
Product quality - as a measure of consistency and performance comparison
Compliance testing - to test safety classification for handling, storage, transport and waste
In-service analysis - tests on in-use oils and other substances for contamination / adulteration
General safety - to evaluate hazard potential
Specifications - to check conformance
The Setaflash Series 3 Active-Cool Tester offers the same features as the Elcometer 6910/1 Setaflash but is fitted with a cup suitable for testing corrosive samples.
It has been designed to carry out Flash/No Flash tests rapidly and efficiently to determine the Flash Point of liquids and semi-solids in the 10°C to 130°C (50°F to 266°F) temperature range.
Flash Point is automatically detected using a thermally activated detector,reducing the risk of operator error and minimising the potential danger of inhaling fumes during a test. A rechargeable gas tank with On/Off switch and fine adjustment are integral to the unit. Supplied with a 2ml (0.067fl oz) syringe and ignitor.
Features:
- Flash Point test in less than 2 minutes
- Small sample size - 2ml (0.067 fl oz) or 4ml (0.135 fl oz)
- Electronic Peltier cooling effect
Technical Specification:
Part Number
|
Description
|
| UK 240V |
EUR 220V |
US 110V |
| K0UK6910M013 |
K0006910M013 |
K0US6910M013 |
Elcometer 6910/3 Setaflash Series 3 Active-Cool |
Sample Size and
Temperature Range |
2ml (0.067fl oz) for Flash Points up to 100°C (212°F) |
| 4ml (0.135fl oz) for Flash Points between 100°C to 300°C (212°F to 572°F) |
| Test Time |
1 to 99 minutes |
| Default Values |
1 minute for flash points up to 100°C (212°F) |
| 2 minutes for flash points between 100°C to 300°C (212°F to 572°F) |
| Cup Material |
Corrosion resistant steel |
| Dimensions |
256 x 280 x 256mm (10.1 x 11.0 x 10.8”) |
| Weight |
5kg (11.3lb) |
| Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. |
| Packing List |
Elcometer 6910 Setaflash Series 3 active-cool closed cup tester, 2ml (0.067fl oz) syringe, gas canister and ignitor, silicone rubber tubing for gas canister to gas jet connection, silicone sample well ‘O’ ring seal for cup/lid (red coloured), viton sample well ‘O’ ring seal for cup/lid (black coloured), mains power cable, automatic flash detector probe, Series 3 manuals (on CD) and operating instructions |
Can be used in accordance with:
ASTMD 1655, ASTMD 3278, ASTMD 3828, ASTMD 3934, ASTME 502, BS 3900-A11, BS3900-A13
BS 3900- A14, BS 6664-4, BS 6664-4, EN 456, ISO 3679, ISO 3680
Standards in grey have been superseded but are still recognised in some industries
|
