 Download Full Catalog
Product Description:
The Elcometer 141 PIG is a quick, versatile method of examination and destructive measurement of coatings in a portable, easy to use instrument.
Ergonomically designed to give a balanced weight distribution for a consistent cut, it is ideal for tough coatings and enamels.
- Large easy grip handle - makes cutting thick or hard coatings easy
- Internal cutter storage compartment
- x50 magnification microscope
Technical Specification:
| Part Number |
Description
|
| A141---D |
Elcometer 141 Paint Inspetcion Gauge |
| Scale Range (maximum) |
0 to 1.8mm (0 to 0.07") |
| Scale Resolution |
0.02mm (0.001") |
Dimensions
(fitted to handle) |
160 x 100 x 35mm (6.3 x 4 x 1.4”) |
Weight
(fitted to handle) |
510g (1lb 2oz) |
| Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability
Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory |
| Packing List |
Elcometer 141 P.I.G, x50 microscope, 3 cutters, marker pen, hexagonal wrench, carry case, operating instructions |
Can be used in accordance with:
AS 1580.108.2, ASTM D 4138-A, BS 3900-C5-5B, DIN 50986, ISO 2808-5B, ISO 2808-6B, JIS K 5600-1-7, NF T 30-123
Standards in grey have been superseded but are still recognised in some industries.
Accessories:
| Part Number |
Description |
Cutting Angle |
Measurement Range |
Graticule Scale Factor |
| T99915761-1 |
Tungsten Carbide Cutter No 1 |
45° |
20 - 2000?m (1 - 80mils) |
20?m (1mil) |
| T99915761-4 |
Tungsten Carbide Cutter No 4 |
26.6° |
10 - 1000?m (0.5 - 35mils) |
10?m (0.5mil) |
| T99915761-6 |
Tungsten Carbide Cutter No 6 |
5.7° |
2 - 200?m (0.1 - 8mils) |
2?m (0.1mil) |
Download Full Catalog |
