 Download Full Catalog
Product Description:
This easy to use, lightweight hydraulic adhesion tester applies an increasing level of pull off force to a dolly adhered to the surface under test simply by turning the handle.
The special test head has self adjusting legs, which ensure that the pull off force is applied perpendicular (90°) to the substrate - even on rough or uneven surfaces.
A wide range of dolly sizes is available in order to meet specific measurement requirements from 8.2mm (0.32”) to 70mm (2.76”) in diameter. Depending on the size of the dolly and application, a dolly adaptor and support ring may be required. Square dollies are also available.
Technical Specification:
| Part Number |
Description |
| K0001910M001 |
Elcometer 1910 PATHandy™ Adhesion Tester |
| Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. |
| Packing List |
Elcometer 1910 PATHandy™ Adhesion Tester, 6.3kN Head, crank handle driven pull mechanism, 5 x 20mm (0.79”) diameter dollies, cutting tool for 20mm (0.79”) diameter dollies, hydraulic cable, carry case with protective interior and calibration certificate |
Can be used in accordance with:
ASTM D 4541, AS/NZS 1580.408.5, EN 13144, EN 24624, ISO 4624, ISO 16276-1, JIS K 5600-5-7, NF T30-062
Standards in grey have been superseded but are still recognised in some industries.
Accessories:
| Part Number |
| Pack of 10 |
Pack of 100 |
Description |
Range |
Adaptor |
Support Ring |
| KT001910P004 |
KT001910P204 |
8.2mm (0.32”) Dolly |
0 -120MPa (17300psi) |
KT001910P401 |
KT001910P108 |
| KT001910P005 |
KT001910P205 |
14.2mm (0.56”) Dolly |
0 - 40MPa (5800psi) |
- |
KT001910P109 |
| KT001910P006 |
KT001910P206 |
20.0mm (0.79”) Dolly |
0 - 20MPa (2900psi) |
- |
KT001910P110 |
| KT001910P010 |
KT001910P210 |
28.2mm (1.11”) Dolly |
0 - 10MPa (1470psi) |
- |
KT001910P111 |
| KT001910P012 |
KT001910P212 |
50.0mm (2.00”) Dolly |
0 - 3.2MPa (460psi) |
KT001910P406 |
KT001910P101
or
KT001910P123 |
| KT001910P018 |
KT001910P218 |
70.0mm (2.76”) Dolly |
0 - 1.6MPa (240psi) |
KT001910P406 |
KT001910P123 |
| KT001910P016 |
KT001910P216 |
50x50mm (2x2”) Dolly |
0 - 2.5MPa (370psi) |
KT001910P406 |
KT001910P123 |
Download Full Catalog |
