|
|
Elcometer 1542 Cross Hatch Adhesion Tester
|
 Download Full Catalog
Product Description:
This is a simple but effective method for determining the coating adhesion on a wide range of substrates. This adhesion tester is ideal for coatings on flat surfaces and is available with one of three different spacings;
- 1mm spacing - for coating thickness <60µm 2="" 4mils="" --60="" m--="">
- 2mm spacing - for coating thickness <125µm 5="" 0mils="" --125="" m--="">
- 3mm spacing - for coating thickness <250µm 9="" 8mils="" --250="" m--="">
Each cross hatch gauge can be supplied separately or combined in a kit with a standardised brush and x10 magnifier.
- Efficient cross hatch cutter with 8 cutting faces
- Anodised aluminium handle with a wheel for stable operation, ideal for test panels
- Supplied with an adjustment gauge for accurate positioning of the cutter face for better adhesion test results
Technical Specification:
| Part Number |
Description |
Coating Thickness |
| K0001542M001 |
Elcometer 1542 Cross Hatch Adhesion Tester (6 x 1mm)1 |
0 - 60µm |
(0 - 2.4mils) |
| K0001542M002 |
Elcometer 1542 Cross Hatch Adhesion Tester (6 x 2mm)2 |
50 - 125µm |
(2.0 - 5.0mils) |
| K0001542M003 |
Elcometer 1542 Cross Hatch Adhesion Tester (6 x 3mm)3 |
121 - 250µm |
(4.8 - 9.8mils) |
| K0001542M201 |
Elcometer 1542 Cross Hatch Adhesive Kit (6 x 1mm)1 |
0 - 60µm |
(0 - 2.4mils) |
| K0001542M202 |
Elcometer 1542 Cross Hatch Adhesive Kit (6 x 2mm)2 |
50 - 125µm |
(2.0 - 5.0mils) |
| K0001542M203 |
Elcometer 1542 Cross Hatch Adhesive Kit (6 x 3mm)3 |
61 - 120µm |
(2.4 - 4.7mils) |
| K0001542M204 |
Elcometer 1542 Cross Cut Kit including 3 Cross Hatch Cutters2 |
| Weight |
200g (0.44lb) |
| Dimensions |
150 x 25 x 35mm (6 x 1 x 1.25") |
| Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability.
Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory. |
| Packing List |
Cross Hatch Cutter, adjustment gauge for setting cutting blades, hexagonal wrench, brush, magnifying glass, carry case and operating instructions |
Can be used in accordance with:
AS 1580.408.4, AS 3894.9, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038
Standards in grey have been superseded but are still recognised in some industries
1ASTM, ISO Test Methods
2AS, ASTM, ISO Test Methods
3ISO Test Methods
Accessories:
| KT001542P001 |
6 x 1mm Cross Hatch Blade1 |
| KT001542P002 |
6 x 2mm Cross Hatch Blade2 |
| KT001542P003 |
6 x 3mm Cross Hatch Blade3 |
| KT001542F006 |
Adjustment Gauge |
| K0001539M001 |
ASTM D3359 Adhesive Tape (1 roll) |
| T9998894- |
ASTM D3359 Adhesive Tape (2 rolls) |
| K0001539M002 |
ISO 2409 Adhesive Tape (1 roll) |
| T9999358- |
ISO 2409 Adhesive Tape (2 rolls) |
| T10713357 |
Cross Cut DIN Brush |
| KT001546N002 |
Magnifier (x10) |
1ASTM, ISO Test Methods
2AS, ASTM, ISO Test Methods
3ISO Test Methods
jQuery(function() { // setup ul.tabs to work as tabs for each div directly under div.panes jQuery("#navlist").tabs("div.prod-descs > div"); });
Download Full Catalog |
|
