| Testing Equipments > Vibration Machine for Mixing in Moulds |
List of Cement Testing Equipments
|
Vibration Machine for Mixing in Moulds
 |
| Vibration Machine for Mixing in Moulds IS: 4031 A specially designed Vibration Machine is used for vibrating the mix in moulds according to strictly controlled programmer at a frequency of 12,000 ± 400 cycles per minute. The Vibrator is mounted over coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The center of gravity of the vibrator, including the cube and mould, is either at the center of the eccentric shaft or within 25 mm below it.The simple design of the machine facilitates easy assembly and dismantling of the cube moulds. The machine is suitable for operation on 230 V, 50 Hz, and single-phase, AC supply. Each machine is supplied with one cube mould. The following mould can be ordered, as optional extra: Mould, M. Steel, for 70.6 cm cube Note: The machine can certified for its frequency by the National Council of Cement and Building Materials (NCCBM) at Extra Cost. |
