 Download Full Catalog
Product Description :
The Elcometer 2210 Zahn Dip Cup is a small U-shaped cup suspended from a looped wire. This method is ideal for measuring the consistency of paints, varnishes and similar products.
Simply dip the cup into the product to be measured, lift it out and measure how long it takes for the contents to empty through the orifice.
There are five cups with five different orifices sizes available, ranging from 5 to 1840cSt.
Technical Specification :
| Part Number |
Description |
Cup Number |
Orifice Diameter |
Range (cSt)(i) |
| K0002210M001 |
Elcometer 2210/1 Zahn Dip Cup |
1 |
1.8mm |
5-56 |
| K0002210M002 |
Elcometer 2210/2 Zahn Dip Cup |
2 |
2.7mm |
21-231 |
| K0002210M003 |
Elcometer 2210/3 Zahn Dip Cup |
3 |
3.8mm |
146-848 |
| K0002210M004 |
Elcometer 2210/4 Zahn Dip Cup |
4 |
4.3mm |
222-1110 |
| K0002210M005 |
Elcometer 2210/5 Zahn Dip Cup |
5 |
5.3mm |
460-1840 |
| K0002210M001C |
Elcometer 2210/1 with calibration certificate |
1 (e) |
1.8mm |
5-56 |
| K0002210M002C |
Elcometer 2210/2 with calibration certificate |
2 (e) |
2.7mm |
21-231 |
| K0002210M003C |
Elcometer 2210/3 with calibration certificate |
3 (e) |
3.8mm |
146-848 |
| K0002210M004C |
Elcometer 2210/4 with calibration certificate |
4 (e) |
4.3mm |
222-1110 |
| K0002210M005C |
Elcometer 2210/5 with calibration certificate |
5 (e) |
5.3mm |
460-1840 |
| Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. |
Can be used in accordance with:
ASTM D 1084-D, ASTM D 4212
(i) For information only
(e) Efflux Time Certificate
Accessories:
|
