Product Description:

This version of the Elcometer 1720 is adapted for testing the spongeability and washability of paper wall coverings in accordance with the EN 233 Standard.

The test consists of scrubbing the sample with a tool under defined conditions.

Features:

• Variable speed mode - the operator can select a speed from 10 to 120 cycles per minute. (1 cycle = 1 motion back and forth of the carriage)
• 1 or 2 specimen fastening frames are supplied for the 2 and 4 station models respectively

Please note that each tool is available as a separate item and should be ordered as required from the list below.

Technical Specification:

Part Number	Description
K1720M402	Elcometer 1720 Spongeability/Washability Tester, 2 Station (110 - 240V)
K1720M404	Elcometer 1720 Spongeability/Washability Tester, 4 Station (110 - 240V)
Dimensions	550 x 460 x 320mm (21.7 x 18.1 x 12.6”)
Weight	2 Station: 31.5kg (70lb), 4 Station: 33kg (73lb)
Certificate available	Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability.
Packing List	Elcometer 1720, 250µm (10mil) metal strip for ASTM D2486 Standard, sample drip tray; 1x glass sheet; (2 station), 2x glass sheet (4 station), 1x specimen holding frame (2 station), 2x specimen holding frame (4 station), set of 3 tools for instrument set up, liquid dosing bottle, liquid delivery pipe, 2 x liquid drain pipe, 3 x mains leads (UK, EUR and US) and operating instructions

Can be used in accordance with:
AS/NZS 1580.459.1, ASTM D 2486, ASTM D 3450, ASTM D 4213, ASTM D 4213:92, ASTM D 4488, ASTM D 4828,
ASTM F 1319, DIN 53778-2:1993, ECCA T11, EN 233/C3.2-A, EN 233/C3.2-B, EN 233/C3.2-C, EN12956, EN 13523-11,
EN 60730-1-A, GME 60269, ISO 105-X12, ISO 11998, JIS K 5600-4-7, PSA D45101

Standards in grey have been superseded but are still recognised in some industries.

Accessories:

KT001720N006	Tool ST1: Sponge with Aluminium Head and 100g (3.5oz) mass	EN233/C3.2-A, EN12956
KT001720N007	Tool ST2: Felt with Stainless Steel Head and 550g (19.4oz) mass	EN233/C3.2-B, EN12956
KT001720N008	Tool ST3: Brush with Stainless Steel Head and 600g (21.2oz) mass	EN233/C3.2-C
KT001720N208	Tool ST4: Brush with Stainless Steel Head and 600g (21.2oz) mass	EN12956
KT001720P067	Tool ST1: 2m Sponge Roll
KT001720P068	Tool ST2: 2m Felt Roll
KT001720P069	Tool ST3: Brush
KT001720P269	Tool ST4: Brush