| Laboratory Equipments >> O Series >> Universal Ovens |
 Universal Ovens |
| Universal Ovens - Memmert Type Suitable for applications involving high temperature upto 300ºC and corrosive chemicals in Laboratories, Research Institutions and Industries. Construction:- These Ovens are sturdy, with double walled construction. Inner chamber is made of M.S Sheets or Highly Polished Stainless Steel. Outer chamber is made of Mild Steel Sheet, duly pretreated in seven tanks process for surface treatment & finished with durable Powder Coated Paint. 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber is fabricated with ribs to adjust shelves to any convenient height. Supplied with 2 or 3 removable shelves. SHELVES are made of perforated polished SS Sheet/M.S. Mesh. Door is double walled & is insulated and is fitted with heavy hinges with a ball catcher spring - loaded door closing device. Heating Element:- Heating elements are made of high grade imported nichrome wire which are insulated inside the porcelain beads and are generally placed at the bottom and both sides ribs for uniform temperature all over the space. Temperature Range:- A Wide temperature range of 50ºC to 300ºC ± 2ºC to 3ºC for various applications. The temp. inside the chamber maintained constant by natural convection currents of heated air. Temperature Control:- Temperature is controlled by IMPORTED capillary type THERMOSTAT. Temperature control knob of each oven is graduated in centigrade degrees after actually observing the temperature is steady state. Supplied with L-shaped prismatic glass THERMOMETER fitted on top of the Oven for reading the chamber temperature. Ventilation:- Air ventilator ports provided on both sides at top to ventilate, gases and fumes if any & accelerate convection process. Control panel:- The equipment is provided with a panel on which are mounted a thermostat control knob, ON/OFF switch high/low switch pilot indication lights. The units are tested for continuous performance and safety in our most modern laboratory equipped with various test instruments. The unit can be fitted with an optional air circulating fan. Power Requirement:- Suitable to operate on 220 V single phase, 50 Hz, AC supply. Size of inner chamber:- W x H x D - No. of Shelves 300 x 300 x 300 mm - 2 355 x 355 x 355 mm - 2 455 x 455 x 455 mm - 2 455 x 605 x 455 mm - 3 605 x 605 x 605 mm - 3 605 x 910 x 455 mm - 3 605 x 910 x 605 mm - 3 Optional Accessories:- Air circulating fan Digital Display Temp. Indicator in lieu of L-shaped Thermometer Digital Display Temp. Controller-Cum-Indicator in lieu of thermostat & L-shaped thermometer Micro processor based PID temp. controller-cum-indicator in lieu thermostat & L-shaped thermometer Timer Spare Accessories:- L-shaped Thermometer |
