headerphoto
Laboratory Equipments >> Centrifuges >> Micro Processor Control Micro Centrifuges with Refrigerated Chamber Table Top Model MP 300R
We have pleasure in presenting you the eltek range of Environment friendly centrifuges with Micro Processor Control and maintenance free brushless induction motor. These smooth working state of the art centrifuges are backed by over 25 years experience in the manufacture of centrifuges and electric motors. The quality of eltek products is well known and needs no special introduction
MP300R Micro Processor Control Refrigerated Micro Centrifuges
Salient Features:

Easy to program micro processor control with 10 / 30 program memory

Environment friendly CFC free cooling system with pre-cooling facility. The cooling system is so designed that it keeps on functioning and maintains the set temperature even after the centrifuging process is switched off by the timer thereby creating a safe environment for the heat sensitive material in th chamber

Low noise brushless induction motor drive
Sturdy steel body with stainless steel drive
Electronic lid lock which opens only when the rotor is static but allows to open the lid in case of power failure
Rotor identification and RCF display

Programmable Features Include
Rotor speed in the range of 100 to the maximum in 10 RPM increment
Timer with a range of 1 to 120 minutes in 1 minute increment and infinite time mode
Acceleration / Deceleration time up to 240 seconds
Temperature ( in refrigerated models ) upto -10° C depending on the type& speed of the rotor head

Various LCD Display on the Front Panel
Display of working speed of the rotor head
Display of working RCF value
Display of remaining time
Display of temperature in the chamber

Various LED Display on the Front Panel
Indication of rotor in motion
Indication of rotor imbalance and auto switch off in case of excessive imbalance
Indication of safe time to open the lid

System Error Message
In case of any system error, the indication panel will display the error message

Technical Data
Model Table Top Micro Centrifuges with Micro Processor Control MP 300
Maximum Speed in RPM 18000
Maximum RCF in xg 23500
Lowest Chamber Temperature in °C - 10
Maximum Tube Size in ml 25
Maximum Capacity in ml 100
Width in mm 720
Depth in mm 450
Height in mm 400
Weight in Kgs 63
Connected Load in KVA 0.9
Choice of Rotor Heads
Model Capacity / ml Type RPM RCF
TC 381 16 x 1.5/2 Angle 14000 16950
TC 382 18 x 0.4 Angle 14000 16950
TC 481 24 x 1.5 Angle 12000 15250
TC 485 8 x 3 Angle 18000 23500
TC 486 6 x 5 Angle 18000 23500
TC 487 8 x 4 Angle 18000 23500
TC 488 8 x 3 Angle 18000 23500
TC 489 8 x 2 Angle 18000 23500
TC 495 Micro- Haematocrite 16000 17600
TC 495 R Reading Device    
TC 383   Swing out 6000 4020