| Drive |
Motorless Drive, No wear and tear of moving
parts or bearing. Suitable for continous operation for longer
duration |
| Speed Control |
Step less variable speed facilitating stirring
from 100 - 900 R.P.M / 15 - 150 R.P.M |
| Re-set Option |
In case the magnetic follower moves off center
due to external disturbance to the liquid or shifting of the
vessel, the reset button can bring the follower in position
and will restart the stirring at the speed set by you. |
| Direction Selection |
Allows you the option of stirring clockwise
or counter clockwise rotation |
| High/Low Speed Mode |
Option of High Speed Mode & Low Speed
Mode to select, depending on the viscosity of the solution
being stirred |
| Heating & Temp. Control |
Surface temperature of Hot plate - Model FSH
3 - 250°. Electronic Temperature control |
| Technical Specifiaction for Model FSH
3R ( With Remote Control) |
| Number of Stations |
1 |
| Stirring Volume |
50 - 3000 ml |
| Mains Input |
240V.AC (-15 to + 10%), 50 Hz (-15 to +5%) |
| Fuse |
2 No, 100Ma, 5A |
| Power Consumption - Drive |
6 Watts |
| Power Consumption - Heater |
500 Watts |
| Speed Range - ( Standard ) |
100 - 900 R.P.M |
| Speed Range - ( Optional ) |
15 - 150 R.P.M |
| Speed Variation |
Constant speed even if viscostiy changes or supply
voltage vary within specified limits |
| Magnetic Stirring Paddle |
9mm Dia x 35 mm Long |
| Hot Plate Temperature |
350° C |
| Temperture Control |
Electronic Control |
| Stirring Plate |
164 mm Dia |
| Electrical Protection |
Current Limit & Short Circuit |
| Housing - Base Plate |
Aluminium |
| Housing - Top Plate |
Stainless Steel |
| Hot Plate |
Not Applicable |
| Housing Surface Finish |
Chemical Resistant Epoxy Powder Coating |
| Dimensional Specifications |
|
Stirring unit with Heater |
Control Panel |
| Width in mm |
185 |
96 |
| Depth in mm |
185 |
96 |
| Height in mm |
85 |
125 |
| Weight in mm |
2.75 |
0.750 |
