Email -
, Phone - +9144 25984175, Mobile - +91 94441 62346
| Language Search | |
| Cleanrooms Laboratory | |
| Pharmaceutical Testing | |
|
Laboratory
Equipments > B Series > BOD Incubators
|
||||||
|
Most versatile and highly reliable low temperature incubator, to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, lever extracts, chemical etc. Construction:- Robust Construction. Outer cabinet is made M.S. Sheet, duly pre treated & finished with epoxy powder coated paint for lasting finish. Inner chamber is made of high polished stainless steel/aluminium (anodized). It has provision for allowing wide range of shelf positions & spacings. SS/Aluminium trays are also provided. Chamber is duly insulated to minimise heat loss. Two door are provided. Outer door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss. Door is provided with lock and key. Inner door is made of transparent acrylic glass for inspecting the specimens inside chamber, without opening the door and with minimum temperature loss. Temperature Control :-The heart of the B.O.D. Incubator is the excellent and reliable solid state temperature controller cum indicator digital display, range from 5ºC to 50ºC + 0.5ºC. Hermetically sealed, high performance compressor works efficiently to lower the inside chamber temperature. Heating elements are placed in the path of moving air duly insulated from the body. Cooling coils also lie in the air circulation path. Air is circulated by a double shaft self-cooled, blower to keep the temp. uniform throughout the inner chamber. A safety thermostat is provided, which switches off the hearters in the event of failure of the normal temp. control system to protect the specimens from excessive heat. Also fitted with a door operated lamp for illumination inside the chamber. Caster wheel provided at bottom for easy mobility. Control Panel :-All controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting fine and coarse knobs allow the user to set any desired temp. A Voltmeter is provided on the panel to read the incoming voltage. Salient Feature :- BOD incubators switches from heating to cooling and vice versa irrespective of the ambient temperature because of its unique design and thus is capable of working without any user intervention. Supplied complete with 3 shelves of anodized Aluminium or Stainless Steel as per the chamber, cord and plug, to work on 220 Volts, 1 Phase, 50 Hz, AC supply. Optional Accessories :- W x H x D Cap. Cu. ft. 455 x 605 x 415 mm 4.0 |
||||||
